To attach the sonicare brush head, Preparing for use, Charging your sonicare – Philips e7000 User Manual

Page 5: Save these instructions

Advertising
background image





Customer Service Information

If you have any questions after reading this manual, feel free to contact our

Customer Service Center or visit our website.

Customer Service Center

1-800-682-7664 (North America), outside North America contact your

local Philips Customer Care Center.

Internet Information

www.sonicare.com (North America) www.philips.com (outside North

America).

SAVE THESE INSTRUCTIONS

Preparing for use

To attach the Sonicare brush head:

1

Align the front of the brush head with the front of the toothbrush

handle. Match the bars on the brush head with the notches inside the

top of the handle and slide the brush head onto the handle.



Screw the brush head nut clockwise until it is firmly tightened. If the

brush head rattles during use, tighten the nut further.



Remove the travel cap from your brush head when you are ready to

brush.



Use the cord wrap in the bottom of the charger to store excess

cord.

Charging your Sonicare

\

Sonicare comes with the batteries completely discharged and should be

charged for at least 24 hours during the first few days of use.

To keep the battery fully charged at all times, you may keep your

Sonicare on the charger when not in use. It takes 24 hours to fully

charge the battery. A fully charged Sonicare can hold a charge for up

,

,

,

Advertising
This manual is related to the following products: