Philips Senseo II Blue US - Manual (Page 9)

C
6 Close the lid and lock the lever.
B
Make sure the lever is properly locked by pushing it down until it snaps
home with a click.
B
Never flush the machine with the lid open! The lid must be properly
locked.
7 Put the plug into a 120V AC electrical outlet.
C
8 Put a bowl (with a capacity of at least 1.5 liters/1.6 qt.) under
the coffee outflow unit to collect the water.
C
9 Press on/off button I. Then press both the ° and °°
buttons briefly at the same time.
◗
The machine will fill itself with water from the water reservoir.
This will take some time and you will probably not notice that
this is happening. After a while, the machine will start flushing and
it will switch itself off after the flushing cycle. During the flushing
cycle the machine produces more noise than during a regular
brewing cycle.
B
Before brewing coffee for the first time, clean the coffee outflow unit and
the pod holders with hot water and some dish soap or in a dishwasher.
Clean the water reservoir thoroughly in hot water, if necessary with some
dish soap.
◗
Now your Senseo coffee machine is ready for use!
Brewing coffee
C
1 Fill the water reservoir with cold water up to the MAX
indication and put it back into the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
- ° MIN: minimum amount of water required to brew one 4.0 oz.
cup of Senseo coffee.
- °° MIN: minimum amount of water required to brew one 8.0 oz.
mug or two 4.0 oz. cups of Senseo coffee.
- HD7810: A full reservoir allows you to make up to five 4.0 oz. cups
Senseo coffee.
9
CLIC
K
4222.200.0290.1_DFU.indd 9 3/26/09 11:03:53 AM