Palm 700P - Manual (Page 57)

Y O U R P H O N E
51
3
CH
AP
T
E
R
Using Flash mode during a call
Flash mode enables you to manually
manage your calls while one or more calls
are active. This mode is often used during a
conference call when one of the calls has
ended but the other remains connected.
1 Press Send from Active Call
View.
2 If the Do you want to switch to Flash
mode prompt appears, select Yes.
3 While in Flash mode, do any of the
following:
• If you have one active call and answer
an incoming second call, press Send
to swap between the calls.
• If you have one active call, to make an
outgoing second call, dial the number
using any of the methods described in
Making calls.
• If you have one active call and place
an outgoing second call, press Send
after establishing a connection
with the second party to set up a
conference session using three-way
calling.
• If you have two calls in conference,
press Send
to hang up one of
the calls; you can then dial another
number and place the new caller into
the conference session.
4 To exit Flash mode and end all the calls,
press Power/End .
Forwarding calls
You can forward calls to another phone
number. Please check with your wireless
service provider about availability and
pricing of forwarded calls; call forwarding is
not available in all areas, and additional
charges may apply.
1 Press Phone .
2 Press Menu .
3 Select Options, and then select Phone
Preferences.