Precor ELLIPTICAL FITNESS CROSSTRAINERS EFX 835 User Manual
Page 19
Advertising
Assembling the EFX
17
Important: Do not stretch, crimp, or damage the cable.
Cables damaged by improper installation will not be covered
by the Precor Limited Warranty.
Figure 3: Thread cable through upright support
3.
Attach the left upright support to the base frame using
four buttonhead screws, four split washers, and four
⁵₁₆
-inch washers. Partially tighten the fasteners.
Figure 4: Attach the upright support to the base frame
4.
Repeat steps 2 through 4 to attach the right upright
support.
Advertising
This manual is related to the following products: