Panasonic DMC-F3 EN - Manual (Page 14)

VQT2R80 (ENG)
14
Inserting and Removing the Card
(optional)/the Battery
• Check that this unit is turned off.
• We recommend using a Panasonic card.
Slide the release lever in the
direction of the arrow and open
the card/battery door.
• Always use genuine Panasonic
batteries (CGA-S/106B; supplied or
DMW-BCF10PP; optional).
• If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by
the lever A being careful about
the direction you insert it. Pull the
lever A in the direction of the
arrow to remove the battery.
Card: Push it fully until it clicks
being careful about the direction
you insert it. To remove the card,
push the card until it clicks, then
pull the card out upright.
B: Do not touch the connection terminals of the card.
• The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the
direction of the arrow.
DMC-F3Basic-VQTXXXX_eng.book 14 ページ ２０１０年１月１２日 火曜日 午後８時２１分