Pfaff 2170 - Manual

Endless Embroidered Pillow
Supplies:
• PFAFF creative 2170 with embroidery unit.
• PFAFF Endless Hoop
• PFAFF Embroidery Design Collection # 383 Endless Needlework
• Schmetz #100 top stitch needle
• SULKY TEAR AWAY Stabilizer
• Mettler poly sheen multi thread
• PFAFF 1/4” Right Guide Foot
• PFAFF Decorative Trim Foot
• Piping Hot Binding Tool
• PFAFF Piping Foot
• PFAFF Open-Toe Appliqué Foot
• “More
sew-it-yourself Home Décor” By Chris Jeffreys
• Sewing
Thread
• Fabric Marking Pen
• Decorative
Trim
• Bag’s & Tote’s Metal Zipper 8 – 12”
• Two Contrasting Fat Quarters
• L’Orna Decorative Touch Wand and Hot Fix Embellishments
Set Up:
•
Choose one fabric for the embroidered center panel and hoop four inches down
from the top. Be sure to line up one of the 18” sides with the guide on the right
side of the hoop.
•
Select design # 10.
•
Using the Mettler poly sheen multi thread and following the directions for
continuous embroidery, embroider the design twice.
•
Trim embroidered panel to 6 ½” x 15 ¼”, centering the design.
•
Cut two border strips out of the contrasting fabric 2 ¼” x 15 ¼”.
•
Cut a backing piece of fabric of your choice 8” x 15 ¼”.
Construction:
1. Using the ¼” Right Guide foot and general sewing thread, stitch the border
pieces to the top and bottom of the embroidered panel.
2. Press both seams to the darker fabric.
3. Switch to the Decorative Trim Foot.
4. Stitch decorative ribbon either just inside or on top of both border seams.
For this you can use a decorative thread or a thread that matches the