Paradyne OpenLane SLM 5.5 - Manual (Page 90)

A. OLCmd Reference
A-20 January 2002 7800-A2-GB32-00
OLCmd ldapmodify
The ldapmodify command adds or modifes entries in the LDAP database. It
accepts input from the STDIN stream.
Format:
OLCmd ldapmodify [ -D bindDN ] [ -w password ] [ -h host ] [ -p port ] [ -F ]
[ -a | -r ] [ -b ] [ -c ] [ -v ]
Where:
Example:
The file new.ldif contains data for new database entries, in LDAP Data Interchange
Format (LDIF). The following command adds the entries to the LDAP database:
OLCmd ldapmodify -D c=US -w admin -a -c < data/new.ldif
-D bindDN Is the Distinguished Name (DN) used to bind to
the directory.
-w password Is the database password.
-h host Is the name or IP address of the OpenLane
management server.
-p port Is the port used to connect to the LDAP database.
-F Specifies that all changes will be forced, even
when input lines begin with
replica: .
-a Specifies that data is to be added. If neither -a nor
-r is specified, -r is presumed.
-r Specifies data is to be replaced. If neither -a nor
-r is specified, -r is presumed.
-b Specifies that any value starting with a forward
slash (/) is the pathname of a binary file.
-c Specifies that the command should continue
execution even after an error.
-v Specifies that debugging information should be
returned.