Pentax Optio P70 - Manual (Page 35)

33
1
Gettin
g
Sta
rte
d
Use of the optional AC adapter kit (K-AC88) is recommended if you
intend to use the camera for a long time or connect it to a computer.
1
Make sure that the camera is turned off and open the
battery/card cover.
2
Remove the battery.
Refer to p.30 - p.31 on how to open/close the battery/card cover and
remove the battery.
3
Insert the DC coupler.
Press the battery lock lever and insert the DC coupler. Confirm the DC
coupler is locked in place.
4
Extract the DC coupler cord.
Pull out the tab at the joint of the camera and the battery/card cover so
that the DC coupler cord is extracted from there.
5
Close the battery/card cover.
Using the AC Adapter
AC plug cord
DC terminal
3
1
AC adapter
6
4
8
7
DC coupler