Pride Mobility 1107 - Manual (Page 20)

20 www.pridemobility.com Jazzy 1107
Figure 10. Jazzy 1107 Assembly View
INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require disassem-
bly to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed to be disas-
sembled and assembled by an end user or by a qualified caregiver before using the product or making comfort adjust-
ments.
I V . A S S E M B L Y / D I S A S S E M B L Y
ARMREST ANGLE ADJUSTMENT
ANTI-TIP WHEEL HEIGHT
ADJUSTMENT
FOOT PLATFORM HEIGHT/DEPTH
ADJUSTMENT
SEAT HEIGHT/ANGLE
ADJUSTMENT
CONTROLLER POSITION
SEAT INSTALLATION
ARMREST WIDTH ADJUSTMENT
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon
insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores
or through your authorized Pride Provider.