Philips VR200/07 - Manual (Page 22)

Switching off the modulator
If you cannot clear picture or sound interference, you can
switch off the built-in modulator.
You should only do this if you have connected the video
recorder to the TV set with a scart cable.
a Switch on the TV set and select the programme number
for the video recorder.
b Make sure that no cassette is in the video recorder. On
the video recorder, press the
SYSTEM button for several
seconds, until, for example, ’ M583’ appears on the video
recorder display.
c
Hold the CLEAR (CL), y button, until ’MOFF’ (modulator
off) appears on the video recorder display. If you want to
switch the modulator on again, hold the
CLEAR (CL), y
button, until ’ M583’ (Modulator switched on) appears on
the display.
d To end, press the TV/STANDBY m button.
19