About the controls on the air conditioner – Panasonic CW-XC143HU User Manual

Page 6

Advertising
background image

6

About

the

Controls

on

the

Air

Conditioner

OPERATION

TEMP

TIMER

AIR

SWING

MODE

ECONOMY

FAN SPEED

1

4

6

5

2

7

3

4

2

1

8

6

5

3

Model: CW-XC103HU, CW-XC123HU, CW-XC143HU

OPERATION BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button takes priority over any other buttons. When you first turn it on, the air conditioner is on the
High cool mode and the temp. at 72°F (22°C).

OPERATION MODE SELECTION BUTTON
Every time you push this button, it will toggle between COOL, FAN.

ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room. The temperature can be set within a
range of 60°F to 86°F by 1°F (16°C to 30°C by 1°C).
Select the lower number for lower temperature of the room.

FAN SPEED SELECTION BUTTON
Every time you push this button, it is set as follows.
[High(F3)

Low(F1)

Med(F2)

High(F3)

...]

ON/OFF TIMER BUTTON
You can set the time when the unit will turn on or turn off automatically by pressing the timer button. If
the unit is operating, this button controls the time it will be turned off. If the unit is off state, this button
controls the time it will start. Every time you push this button, the remaining time will be set as follows.
- Stopping operation

(1Hour

2Hours

3Hours

4Hours

5Hours

6Hours

7Hours

8Hours

9Hours

10Hours

11Hours

12Hours

0Hour

1Hour

2Hours

... )

The Setting Temperature will be raised by 2°F(1˚C) 30min. later and by 2°F(1˚C) after another 30 min.

- Starting operation

(1Hour

2Hours

3Hours

4Hours

5Hours

6Hours

7Hours

8Hours

9Hours

10Hours

11Hours

12Hours

0Hour

1Hour

2Hours

... )

AIR SWING BUTTON
This button can automatically control the air flow direction.

ECONOMY BUTTON
If you push this button, the fan stops when the compressor stops cooling. Approximately every 3 minutes
the fan will turn on and check the room air temperature to determine if cooling is necessary.

REMOCON SIGNAL RECEIVER

6

6

7

7

8

8

Precaution: The Remote Control unit will not function properly if strong light strikes the sensor window of the

air conditioner or if there are obstacles between the Remote Control unit and the air conditioner.

Advertising
This manual is related to the following products: