Primate Systems PDP TV - Manual (Page 22)

Memorizing the Channels
Selecting the Signal Source
search
source antenna cable
autoset <select> to enable
auto fine tune off on
fine tune
channel skip
off on
50
Your PDP TV can memorize and store all of the available channels for both antenna and cable channels.
After the available channels are memorized, use CH
/ to scan through the available stations. 5 6
1
Before your PDP TV can memorize the available channels, you must specify the type of signal source
that is connected
2
options
tv tuner
content blocking
3
4
5
6
If you are connected to an antenna, please select antenna
(the selected item displays in green). If you connect cable,
please select cable.
Storing Channels in Memory Automatically
Repeat steps 1~4 in [ ] to Selecting the Signal Source
1
2
3
The unit will begin memorizing all of the available
source antenna cable
autoset <select> to enable
auto fine tune
fine tune
channel skip
50
channel searching
please wait or
press menu to cancel
12
select to activate tuner menu
right/left to change source
select to activate autoset
19
off on
off on
search
The process of auto memory will be stopped if you press the
button. MENU
Note:
If the menu does not display, press search VOL+/-