Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 19)

Cardio Theater Integrated Bracket Assembly Instructions
page 19
Front
cover
Upright
support
21. Replace the back cover and rubber grommet.
Replace the back cover onto the upright sup-
port. Fit the lip of the back cover into the tabs
along the inside surface of the grommet. Apply
pressure to the top of the back cover while you
tighten the screws.
22. Reinstall the front cover and secure it with the
two screws removed in step 2.
Before tightening the front cover be sure to fit
the lip of the front cover into the tabs along the
inside surface of the grommet.
To complete the installation, refer to the instructions
on page 19.
21
22
Preparing the EFX556i
Back
cover
Upright
support
Rubber
grommet
Rubber
grommet
Front
cover