Panasonic MC-GG773 - Manual (Page 36)

- 36 - - 13 -
Voltaje Protector termal Extensión de cordón Herramientas
120 V c.a. (60 Hz) Si 15.2 m (50 pi) Si
Power Thermal Protector Cord Length Tools
120V AC (60 Hz) Yes 15.2 m (50 Ft.) Yes
Alimentation Protecteur thermique Longueur du cordon Accessoires
120 V c.a. (60 Hz) Oui 15.2 m (50 pi) Oui
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Cleaning Exterior and Tools
➢ ➢ Clean exterior using a clean, soft cloth that has been dipped in a solution of mild
liquid detergent and water and wrung dry.
➢ ➢ DO NOT drip water on vacuum cleaner
➢ ➢ Wipe dry after cleaning.
➢ ➢ DO NOT clean tools in dishwasher or clothes washer.
➢ ➢ Wash tools in warm soapy water, rinse and air dry.
➢ ➢ DO NOT use tools if they are wet.
Cleaning Agitator
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate. See: “Removing
and Installing Lower Plate”
➢ ➢ Cut off any hair, thread, string, carpet
pile, and lint entangled around
agitator with a pair of scissors.
➢ ➢ Remove agitator. See: “Replacing
Belt”
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator and lower plate.
See: “Removing and Installing Lower
Plate”