Philips SBCHM450 - Manual (Page 2)

For preview purpose only
SBCHM450/00
Technical specifications Product highlights
PC Headset
Date of issue 2006-07-07
Version: 1.0
12 NC: 9082 100 01711
EAN: 87 10895 75959 5
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
© 2006 Koninklijke Philips Electronics N.V.
All Rights reserved.
www.philips.com
Sound
• Acoustic system: Semi-open
• Diaphragm: Mylar dome
• Frequency response: 20 - 20 000 Hz
• Impedance: 32 Ohm
• Impedance microphone: 2.2k Ohm
• Magnet type: Neodymium
• Maximum power input: 100 mW
• Micophone cartridge: 5 mm
• Sensitivity: 102 dB
• Sensitivity microphone: -40 +/- 3 dB
• Speaker diameter: 40 mm
• Type: Dynamic
• Voice coil: Copper
Connectivity
• Cable Connection: Two-sided
• Cable length: 3 m
• Connector: 2 x 3.5 mm
• Finishing of connector: Chrome plated
• Type of cable: Copper
Convenience
• Mute switch
• Volume control
•
3m cable
A handy cable length to make it easier for you to move
freely around while using your headphones.
Full size design
Full-size earshells not only cover your whole ear for
better sound quality, but also provide space for a larger,
higher performance driver.
In-line volume control
Adjust the volume to your preferred level without having
to go to the audio source unit.
Mute microphone function
Simply mute your headset microphone when you want
to say something that you don't want your interactive
gaming partner to hear.
Rotary microphone boom
This free moving boom on the headset helps you
optimally position the microphone for clear voice pick-
up during net meetings.
Uni-directional design
This microphone is most sensitive to sound coming from
the direction of the performer, and far less sensitive to
sound form all other directions. The result is clear voice
reproduction with little risk of feedback from speakers
on stage.