PYLE Audio PLD162 - Manual (Page 16)

16
GENERAL OPERATION BASIC PLAY OPERATION
remote control is pressed, normal
playback will continue.
- Press (Stop) button twice to stop the
playback and go back to DVD LOGO.
Pausing Play/Step Play
Pressing on the remote control for the first
time or presing
on the front panel during
playback will stop playback temporarily. To
return to normal playback, press on the
remote control or
on the front panel.
If you play a DVD/VCD/SVCD, press on
the remote control again to stop at the next
picture (step function). If you play a
CD/MP3/Picture CD, pressing on the
remote control again is ineffective.
Rapid Forward/Rapid Reverse
Press & on the remote control or hold
/ buttons on the front panel for
several seconds during playback. Each time
the button is pressed, the speed of rapid
forward/reverse changes according to the
disc as follows.
DVD:
VCD/CD/MP3:
Slow Motion Playback (For DVD Only)
Press / during play.
Each time the button is pressed, the speed
of slow forward/reverse changes according
to the disc as follows.
DVD:
In slow motion state, press on the remote
control to recover normal playback.
Skipping Track
Press / buttons on the remote control
or on the front panel during playback.
Press
to skip to the next track, and press
to skip to the previous track.
Note: For some VCD2.0 discs (PBC-
playback control),
/ buttons may be
unavailable.
DVD VIDEO MENU PLAY
When playing a DVD disc in the DVD player:
1) The disc will be played automatically and
stop at menu picture.
2) Use / , / cursor buttons to move
between the highlight bars in the menu.
3) Press ENTER button to confirm the
selected item.
Normal Playback X2 X4 X16 X100
Normal Playback X2 X4 X8
X1/32 X1/16 X1/8 x1/4 x1/2
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display of the front panel.
RESET FUNCTION
RESET button is placed on the front panel
and must be activated with either a ballpoint
pen or thin metal object. The reset button
is to be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button, the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
LAST PLAY MEMORY
• During disc playback, if you press
(POWER) button to turn off the unit and
then press the button again to turn on the
unit, the DVD unit will resume playing from
the point that just interrupted.
• During disc playback, if you press MODE
button to switch to radio mode or AV
mode, then return to DVD mode again,
the unit will resume playing from the point
that just interrupted.
• During disc playback, press REL button
to release the front panel, the unit will enter
into standby state. Then install the front
panel again, the unit will resume playing
from the point that just interrupted. If in
AV mode or radio mode, release the panel
then install again, the unit will remain in
the previous mode.
• Switch the ignition key to “ACC OFF” then
switch to “ACC ON”, the unit will remain
in the previous mode. If in disc play mode,
it will resume playing from the point that
just interrupted.
AV IN OPERATION
When you connect another audio/video
system to the unit through the AV IN
terminals on the back of the unit, press
MODE button on the front panel or
MODE on the remote control to select
AV IN mode.
Stopping Playback
- Briefly press (Stop) button to pre-stop
the unit playback, when button on
the front panel or (Play) button on the