Epson Stylus Pro 7000 - Manual (Page 45)

2-11
Handling Paper | 2-11
9. To help paper feed out of the printer, pull out the two paper guides at
the bottom of the printer.
You can now send your print job.
Cutting Roll Paper Manually
When you’re not using the Auto Cut setting, you need to cut the paper
manually after your print job is finished. Follow these steps:
1. If the paper is not positioned correctly, press one of the Paper Feed
buttons to adjust the paper position. Normally, you don’t need to do
this after a print job is finished.
2. Press the Paper Source button until the Roll Auto Cut light comes on.
3. Press the Cut/Eject button. The paper is cut.