Pioneer CNDV-20 - Manual (Page 95)

93
Chapter
4
Utilizing V
arious
Inf
ormation
■Changing background picture stored on a disc (AV Background
only)
1 Select “Settings”, “Background Picture Setting” from the Main menu, and click the
OK button.
Background Picture Setting menu is displayed. The picture selected at each screen is indi-
cated on the right side of “AV Background” and “Navigation Background” items.
2 Select “AV Background” and click the OK button.
The list of the pictures available is displayed. If you want to install a picture directly from
PC card, refer to Step 4 onwards in “Selecting a picture stored in PC card”.
3 Select a picture you want for the background, and click the OK button.
Shot
The message whether or not to set the picture being selected appears.
4 Click the OK button.
Selected picture is set.
➲
Only JPEG format (“.jpg”) pictures can be used as a background picture.
➲
You can only use standard characters (alphabets of both cases : A-Z, a-z) and num-
bers (0-9) for the file name of a background picture (international (accented) charac-
ters cannot be used).
➲
Up to maximum 2048 ×1536 pixels picture can be used. We cannot guarantee a proper
operation for an picture bigger than this size.
➲
Progressive format JPEG pictures cannot be used.
➲
When storing original pictures in a PC card, create a folder named “BG” in a PC Card,
and store the picture files in this folder. In the “BG” folder up to 20 pictures can be
stored.
➲
When changing a picture starts, do not cut off the vehicle engine until the message
informing the completion of changing a picture is indicated. Otherwise a picture file
may be destroyed.
➲
If a map disc is not set to the Navigation System, you cannot change the background
picture.
➲
When the Navigation System is reset, or the language setting is changed, background
picture may be changed to the original picture. (There is also a possibility that the sys-
tem will revert to the original picture for some other reason). If this happens, reset the
background picture.