Pixel Magic Systems VPS3800 - Manual (Page 74)

7.10 PICTURE IN PICTURE/PICTURE BY PICTURE
• When Crystalio II is in “Picture In Picture” (PIP) mode, there is a small sub-picture on top of the
main picture, which comes from another video input source. In PIP mode, you can:
• Adjust the position of the sub-picture
• Adjust the size of the sub-picture
• Adjust the transparency of the sub-picture
• Crop the 4 sides of the sub-picture
• When Crystalio II is in “Picture By Picture” (PBP) mode, main picture is shifted to one side and
a sub-picture, which comes from another video input source, appears in the other side (they
are side by side). In PBP mode, you can:
• Adjust the position of the line splitting the main picture and sub-picture
• Adjust the position of the sub-picture
• Adjust the size of the sub-picture
• Crop the 4 sides of the sub-picture
• You can choose to have a frame on the sub-picture and/or main picture
• Main picture and sub-picture can be swapped
• When main picture is in passthru mode, PBP mode will be ignored
• Video Input:
• You can select any of the video input sources as the sub-picture, but with the following
exceptions:
• Audio Input:
• The audio mapped to the video source of sub-picture is the same as defined in Audio
Input Select (see Section 5.4.1 ). However, in a simlar way to video input, there are
exceptions:
When audio input of Audio input of
main picture is sub-picture can not be
HDMI 1 HDMI 2
HDMI 2 HDMI 1
HDMI 3 HDMI 4
HDMI 4 HDMI 3
Analog audio 1 Analog audio 2, nor Analog audio 3
Analog audio 2 Analog audio 1, nor Analog audio 3
Analog audio 3 Analog audio 1, nor Analog audio 2
When video source Video source of
of main picture is sub-picture can not be
HDMI 1 HDMI 2
HDMI 2 HDMI 1
HDMI 3 HDMI 4
HDMI 4 HDMI 3
Component 1 Component 2
Component 3 Component 4
74