Panasonic DMC-LX1GN - Manual (Page 33)

Recording pictures (basic)
33
VQT0S46
n Programme shift
In Programme AE mode, you can change
the preset aperture value and the shutter
speed under the same exposure. This is
called Programme shift.
By this function, you can make the background
more blurred (by decreasing the aperture value)
or record the moving subject more dynamically
(by setting to slow shutter speed) in Programme
AE mode.
• While the aperture and shutter speed are
shown on the LCD (about 10 seconds), move
the joystick to activate Programme shift.
(e.g.: When the focus switch is set to [AF])
• r: When the focus switch is set to [AF] or
[AFw] (P85)
• w: When the focus switch is set to [MF]
(P82)
• When the Programme shift is activated,
the Programme shift indication 1 appears
on the screen.
n Example of Programme shift
(A): Aperture value
(B): Shutter speed
• If the exposure is not adequate when
pressing the shutter button halfway, the
shutter speed turns red.
• When 10 or more seconds have passed
after the Programme shift becomes
effective, the status to activate the
Programme shift is cancelled and
returned to the Programme AE mode.
However, the setting on the Programme
shift is memorized.
• Programme shift is cancelled when
turning the camera off.
• The Programme shift may not be
activated depending on the brightness of
the subject.
19
F2.8 1/30
or
1
19
F3.2 1/30
2 3 4 5 9 11 12 13 14
1 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/1000 1/2000
2
2.8
4
5.6
8
(Ev) 6 10 7 8
(A)
(B)