Maintenance, Steering assembly, Rear spring – Polaris Phoenix 9922500 User Manual
Page 63: Side panel removal
Advertising

61
MAINTENANCE
Steering Assembly
Check the steering assembly of the vehicle periodically for loose nuts
and bolts. If loose nuts and bolts are found, see your Polaris dealer for
service before operating the vehicle.
Rear Spring
The rear shock absorber spring is
adjusted by rotating the adjuster either
clockwise or counterclockwise to
increase or decrease spring tension.
Accessory springs are available through
your Polaris dealer.
Side Panel Removal
1. Remove the seat.
2. Remove the three fasteners
securing the side panel to
the vehicle.
3. Pull the side panel away
from the vehicle.
Adjuster
Fasteners
Advertising
This manual is related to the following products: