ProForm 831.24623.0 - Manual (Page 14)

14
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The upper display will show
the total number of hours that
the treadmill has been used.
The lower left display will
show the total number of miles
(or kilometers) that the walking
belt has moved.
An “E” (for English) or an “M”
(for metric) will appear in the
lower right display. Press the
Speed increase button to
change the unit of measure-
ment, if desired.
IMPORTANT: If a “d” appears
in the lower right display, the
console is in the “demo” mode.
This mode is intended to be
used only when a treadmill is
displayed in a store. When the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays will remain lit; the buttons will not oper-
ate.
If a “d” appears when the information mode is
selected, press the Speed decrease button so the
“d” disappears.
To exit the information mode, remove the key from the
console.