Panasonic KX-FP181E - Manual (Page 35)

33
Sending Faxes
1 Insert the document FACE DOWN.
● If necessary, press
repeatedly to select the desired setting
(p. 30).
2 Enter the fax number using the dial keypad
or .
3 Press .
● The document will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will
transmit the document.
● The amount of memory used will be shown
as a percentage on the display.
Display:
Amount of memory used (%)
● The stored document will be automatically
erased after transmission.
PAGES=01 05
QUICK SCAN
EASY DIAL
RESOLUTION
FACE DOWN
QUICK SCAN
Display
RESOLUTION STOP
EASY DIAL
Sending from memory !
The unit is able to scan documents, store them in memory, and then transmit them from
memory. The memory capacity is approx. 25 pages based on the ITU-T No. 1 Test Chart in
standard resolution (p. 86).
Note:
● If you select the “FINE”, “SUPER FINE” or “HALF
TONE” resolution, the number of pages that the unit
can transmit will decrease.
● If the stored pages exceed the memory capacity, the
transmission will be cancelled.
To cancel the memory transmission
Press while or after scanning the
document.
STOP
1 Press twice.
Display:
2 Press .
3 Insert the document FACE DOWN until a
single beep is heard and the unit grabs the
document.
4 Press and dial the
fax number.
● You can also use the handset.
5 When a fax tone is heard, press
. FAX START
DIGITAL SP-PHONE
SET
1.SEND GUIDE
HELP
To transmit, insert the
document face down until you
hear the beep.
Voice guide:
Press the speaker phone
button, then dial the phone
number. When the fax tone is
heard, press the start button.
Start transmission.
Sending a fax with the voice guide
(KX-FP185 only) !