Philips BDP5005/F7 - Manual (Page 7)

7 EN
FUNCTIONAL OVERVIEW
* The unit can also be turned on by pressing these buttons.
1.
Q (STANDBY-ON) button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord).
2. Disc tray
• Place a disc when opening the disc tray.
3. A (OPEN/CLOSE) button*
• Press to open or close the disc tray.
4. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
5. Display
• Refer to “Front Panel Display” on page 10.
6. C (STOP) button
• Press to stop playback.
7. F (PAUSE) button
• Press to pause playback.
8. B (PLAY) button*
• Press to start or resume playback.
9. SD card slot
• Insert an SD Memory Card and play back the
contents in it.
1. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
2. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
3. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA video cable.
4. LAN Terminal
• Use to connect a telecommunications equipment
with LAN cable.
5. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
6. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA audio cable.
7. DIGITAL OUT (OPTICAL/COAXIAL) jacks
• Use to connect an AV receiver / amplifier, Dolby
Digital/DTS decoder or other device with a digital
audio optical/coaxial input jack with a digital audio
optical/coaxial cable.
Front Panel
1 2 3* 5 6 7 8* 4 9
Rear Panel
HDMI OUT LAN
VIDEO
OUT
AUDIO OUT
L
R
DIGITAL OUT
COAXIAL OPTICAL
PCM/BITSTREAM
COMPONENT
VIDEO OUT
P R /C R
P B /C B
Y
5 4
6 7
3 2 1
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
In
trod
uc
ti
on
Co
nn
ectio
ns
Basi
c Setup
P
la
ybac
k
O
the
rs
Fu
nc
ti
on
S
e
tu
p