Switching the warning tone, Switching the face auto open, Switching the auxiliary setting – Pioneer SUPER TUNER III D DEH-P8850MP User Manual

Page 61: Switching the dimmer setting, Adjusting the brightness, Initial settings

Advertising
background image

Black plate (61,1)

2

Press MULTI-CONTROL to select the AM

tuning step.
Pressing

MULTI-CONTROL repeatedly will

switch the AM tuning step between 9 kHz and
10 kHz. The selected AM tuning step will ap-
pear in the display.

Switching the warning tone

If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone will sound. You
can turn off the warning tone.

1

Use MULTI-CONTROL to select

Warning tone.
Warning tone appears in the display.

2

Press MULTI-CONTROL to turn warning

tone on.
ON appears in the display.

# To turn warning tone off, press
MULTI-CONTROL again.

Switching the face auto open

For theft protection, the front panel opens
automatically and easily detaches. Face auto
open is on as a default.

1

Use MULTI-CONTROL to select

Face auto open.
Face auto open appears in the display.

2

Press MULTI-CONTROL to turn the face

auto open on.
ON appears in the display.

# To turn the face auto open off, press
MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary equipments connected to this unit
can be activated individually. Set each AUX
source to ON when using. About connecting
or using auxiliary equipments, refer to Using
the AUX source on page 64.

1

Use MULTI-CONTROL to select AUX1/

AUX2.
AUX1/AUX2 appears in the display.

2

Press MULTI-CONTROL to turn AUX1/

AUX2 on.
ON appears in the display.

# To turn AUX off, press MULTI-CONTROL
again.

Switching the dimmer setting

To prevent the display from being too bright at
night, the display is automatically dimmed
when the car

’s headlights are turned on. You

can turn the dimmer on or off.

1

Use MULTI-CONTROL to select Dimmer.

Dimmer appears in the display.

2

Press MULTI-CONTROL to turn dimmer

on.
ON appears in the display.

# To turn dimmer off, press MULTI-CONTROL
again.

Adjusting the brightness

You can adjust the display brightness. Initially
this mode is set to

24.

1

Use MULTI-CONTROL to select

Brightness.
Brightness appears in the display.

<CRD4089-A/N>61

Initial Settings

En

61

English

Section

12

Advertising