Figure 1, Figure 2, Step 1 – ParaBody 848101 User Manual
Page 4: Step 2
Advertising
FIGURE 1
STEP 1:
• SECURELY assemble the one 3/8 X 2-3/4” BOLT (25), two 3/8” WASHERS (19), and one 3/8” LOCK NUT (20) to the STAND (3) as
shown in FIGURE 1.
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
• Assemble two 2” SQ. COVER CAPS (14) onto the ends of the STAND (3) as shown in FIGURE 1.
• Insert two 3 X 2” END CAP (15) into the ends of the BASE (1) as shown in FIGURE 2.
FIGURE 2
STEP 2:
3/8 X 2-3/4” 25
19
14
15
20
1
3
13
• Assemble one 2” SQ. END CAP (13) into the end of the STAND (3) as shown in FIGURE 1.
4
Advertising