Delete a static nat entry, Static ip routing, Configure the static route – Polycom 4300T User Manual
Page 52: Delete a static nat entry –34, Static ip routing –34, Configure the static route –34
Advertising
User Guide V
2
IU 4300T Converged Network Appliance
3 - 34
Delete a Static NAT entry
1.
Select NAT.
2.
To delete an IP address or a range of IP addresses highlight the entry in
the Static NAT Client Entries list and press the Delete key on your
keyboard.
3.
Press Submit.
Static IP routing
In addition to locally connected IP networks the 4300T can forward traffic for
a remote data network by configuring a static route entry. Any packets
destined for the remote data network will be forwarded to the specified
gateway address in the entry.
Configure the static route
1.
Select System.
2.
Select System Overview.
3.
Select Route.
Advertising