Panasonic WV-NW502SK - Manual (Page 19)

B
B
B
A
A
A
51 mm
{2"}
ø27 mm {1-1/16"}
Cable access hole
Center of camera mount bracket
Female thread for conduit
Mount bracket
(For use of the hole A) (For use of the hole B)
138 mm {5-7/16"}
138 mm
{5-7/16"}
85 mm
{3-11/32"}
85 mm {3-11/32"}
(A For use of the hole)
19
Using supplied mount bracket
• If the mount bracket (accessory) is used to mount the camera, mount the bracket on the
wall or ceiling first (see the blow).
Mount the camera attachment (accessory) with the supplied screws next (
☞ page 20).
(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})
Note:
• When the camea is mounted on the wall or ceiling with a hole for cable running, or the cam-
era is mounted using open wiring, the mount bracket is used.
• The female thread for conduit is compliant with ANSI NPSM (parallel pipe threads) 3/4".
The female thread for conduit can be removed using a hexagon wrench.
• Refer to page 33 for how to connect the conduit.
z
Mount the mount bracket (accessory) on the wall or ceiling.