Panasonic KX-TG2224F - Manual (Page 12)

Programmable Functions
12
Date and Time
“ ” flashes on the base unit display if the clock has not been set.
Set the clock by following the steps below.
• When entering the time in step 3, you cannot enter numbers greater than 12.
Do not use military time. (To set 13:00 hours, enter “0100”, then select “ PM ” in
step 4.)
1 Press [MENU] .
2 Scroll to “ Date and time ” by pressing [ ] or
[ ] , then press Select .
3 Enter 2 digits each for month, day and year.
(Ex. To set Apr. 7, 2003, enter “04 07 03”.)
Enter 4 digits for time (hour and minute).
(Ex. To set 9:30, enter “0930”.)
• If you enter a wrong number, press [ ] or [ ] to
move the cursor to the incorrect number. Enter the
correct number.
4 Select “ AM ” or “ PM ” by pressing AM/PM .
5 Press Save , then press [OFF] .
• The clock is set and “ ” disappears from the
base unit display.
• If 3 beeps sound after pressing Save , the setting
is not correct. Start again from step 3.
If a power failure occurs, the time setting may be incorrect. When “ ” flashes
on the base unit display, adjust the date/time.
Handset
>
>
Date and time
Exit Select
>
>
1
2
>
>
Date:12.31.2003
Time:12:00 AM
AM/PM Save
Date:04.07.2003
Time:09:30 AM
AM/PM Save
Example
1
0
Date:04.07.2003
Time:09:30 AM
AM/PM Save
0