ProForm 590 QS - Manual (Page 14)

14
THE INFORMATION MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour.
To select the information mode, hold down the
START/STOP button while inserting the key into the
console. When the information mode is selected, the
following information will be shown:
The DISTANCE/LAPS
display will show the total
number of miles that the
walking belt has moved.
The TIME/MIN-MILE display
will show the total number of
hours the treadmill has been
used.
An ТE,У for english miles, or
an ТM,У for metric kilometers,
will appear in the SPEED dis-
play. Press the SPEED
▲ ▲ but-
ton to change the unit of mea-
surement.
IMPORTANT: The CALS./
FAT CALS./PULSE display
should be blank. If a ÒdÓ ap-
pears in the display, the con-
sole is in the ÒdemoÓ mode.
This mode is intended to be
used only when a treadmill is
displayed in a store. When
the console is in the demo
mode, the power cord can be
plugged in, the key can be re-
moved from the console, and
the displays and indicators on
the console will automatically
light in a preset sequence, although the buttons on the
console will not operate. If a ÒdÓ appears in the
CALS./FAT CALS./PULSE display when the informa-
tion mode is selected, press the SPEED
▼ ▼ button
so the CALS./FAT CALS./PULSE display is blank.
To exit the information mode, remove the key from the
console.