Panasonic SC-EN37 - Manual (Page 3)

[z PLAY] Timer PLAY ON/OFF
[1-9, 0, ≧10] Numbered buttons
To select a 2-digit number
e.g. 16: [ ≧10]  [1]  [6]
To select a 3-digit number
e.g. 226: [ ≧10]  [ ≧10]  [2]  [2]  [6]
[MUSIC PORT] Selector switch to MUSIC PORT
[DISPLAY]
CD: CD Display (Elapsed play time/Remaining play time)
MP3: MP3 Display (Elapsed time/Album name/Track
name/ID3 [Album]/ID3 [Track]/ID3 [Artist])
[2/u, 1\i] CD: Skip/Search
MP3: Track Skip
TUNER: Tune up/down, [Long press] Auto tuning
[g] Stop button
[OPTION q/h] Selector switch to OPTION.
Direct OPTION Play/OPTION Pause
3
[;, OPEN/CLOSE] Open and Close CD lid
 Press [POWER 8] to turn the unit on.
 Press [; OPEN/CLOSE] to open the CD lid and then set the CD in place.
Press [; OPEN/CLOSE] again to close the lid.
Keep fingers away from the CD lid when it is closing to avoid possible minor injury.
Label must face outward.
Press until you hear it click into place.
 Press [CD q/h] to start play.
 Adjust the volume.
Be sure to press the [; OPEN/CLOSE] button to open and close the CD lid.
Damage may occur if the lid is forced closed.
During standby, if the CD is ready in the unit, the unit comes on and play begins.
(One touch play) •
•
•
Basic play
Discs operations
Connections
R
L
SA-EN35 SA-EN37
2.
FM/AM antenna
Stand the antenna up on its base.
Unplug the antenna connector by holding the taped part.
Taped part
FM antenna
AM antenna
3.
iPod connection
Proceed to step 4 if you are not connecting an
iPod to the main unit.
➡ Refer to page 5 for further information.
Headphones
(not included) Reduce the volume
level and connect the
headphones.
Plug type: 3.5 mm (1/8”)
stereo.
To prevent hearing damage,
avoid listening for prolonged
periods of time .
Note
Stop Press [g].
Pause Press [CD q/h]. Press again to resume play.
Skip/Search Press [2/u] or [1/i] to skip/
Press and hold [2/u] or [1/i] to search.
You can search during play or while paused.
You cannot search through MP3 files.
You can only search within the current track during
program play, one track repeat, and random play.
•
•
•
Skip album Press [ALBUM or ] in the play mode.
Press [ALBUM or ] once and then the numbered buttons
in the stop mode.
Direct access play
(Play starts with the
track you select.)
Press the numbered buttons to select the desired track.
 Press [ALBUM or ] to select the album.
 Press [1/i] once and then press the numbered buttons
to select the desired track.
Note
Note
1.
Speakers
R
L
1
2
Copper (+)
Silver (-)
Silver (-)
Copper (+)
➡ Page 2 for the position of remote control and main unit buttons.
The function allows you to program up to 24 tracks.
 Press [PGM, -AUTO PRESET] while stopped.
 Press the numbered buttons to select tracks. (Maximum 24 tracks)
Repeat this step to program other tracks.
 Press [CD q/h] to start play.
 Press [PGM, -AUTO PRESET] while stopped.
 Press [ALBUM or ] to select your desired album.
 Press [1/i] once and then press the numbered buttons to select tracks.
(Maximum 24 tracks)
 Press [ENTER].
Repeat step 2 to 4 to program other tracks.
 Press [CD q/h] to start play.
g Confirm a programmed
track
Press [2/u] or [1/i] when “PGM” is displayed
in the stop mode. To check while programming,
press
[PGM, -AUTO PRESET] twice after “PGM”
appears, then press [2/u] or [1/i].
g Delete all programs Press [CLEAR] in the stop mode.
“CLR ALL” is displayed.
g Cancel program mode Press [PGM, -AUTO PRESET] in the stop mode to
clear “PGM” indicator from the display.
Program contents are stored in the unit’s memory even after changing to a different
function or turning the unit off. All program contents are erased by pressing [CLEAR]
or by opening the CD lid.
Program play
Track number Program number
Note
PGM
Album number Track number
MP3
CD
MP3
CD
MP3
4.
AC power supply cord
AC IN
To household
AC outlet
Conserving power
The unit consumes 2.0 W even it is turned off with [POWER
8
]. To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
Remember to reset the radio stations and any other memory
items before using the unit again.
If the unit is left unplugged for longer than approximately two
weeks, all settings will revert to the factory settings.
Connect the AC power supply
cord after all other connections
are complete.
Note
 Connect the DC in cord from
left speaker to main set.
 Connect the AC power supply cord. Red
Red
Black
Black
Portable audio equipment
(Cords and equipment not included)
Use
Adjust the volume and sound quality of this unit and the
other equipment.
For details, refer to the instruction manual of the other
equipment.
•
•
Portable audio player Plug type:
3.5 mm (1/8”) stereo
➡ Start Playback from the
Portable audio source.
Note
MAIN UNIT REMOTE CONTROL Connect the Universal
Dock for iPod to OPTION
port.
SC-EN37_3P.indd 3 22/03/2007 17:15:18