Panasonic KX-PX20M - Manual (Page 96)

96
Troubleshooting (continued)
Problem Cause and Remedy Page
It takes considerable
time for the image to
be displayed. • It may take some time until the image is displayed,
depending on the image format or size of the image.
This is not a malfunction.
—
It takes considerable
time for the initial
screen to be
displayed. • Do you have many images stored on the memory card?
⇒ It may take some time until the image is displayed.
This is not a malfunction.
—
The image is
distorted. • Is the printer located close to any devices that may be
emitting electric waves or magnetic waves?
⇒ Make sure the printer is not set close to any game
devices, stereo speakers or large format monitors,
etc.
10
The remote control
does not work. • Are there any obstacles between the printer and the
remote control?
⇒ Remove any obstacles that may be in the way.
• Are you pointing the remote control at the remote control
receiver on the printer?
⇒ Make sure that you are aiming the remote control at
the printer’s remote control receiver.
• Is the battery used up?
⇒ Replace the battery with new one.
15
15
14
Printing PC
Printer
Problem Cause and Remedy Page
• Don’t know how to
stop the printing
process when
printing from a
computer.
• Printing has
started after
starting the
computer.
• Click [Cancel Printing] on the status monitor.
• Select [Start] → [Printers and Faxes] (or [Start] →
[Settings] → [Printers]) and then double-click the icon
for this printer. Then select [Printer] → [Cancel All
Documents] (or [Purge Print Documents]).
86
—
• Cannot start
printing from the
computer.
• ERROR lamp on
the printer is lit
or blinking when
printing from the
computer.
• Check the information displayed on the status monitor. 86
98
99