Panasonic PT-50DL54X - Manual (Page 29)

I CON M ENUS O PERATION
27 z
ENGLISH
Canadian French (cont).
Canadian French Ratings Description
Main and Split Blocking Message
If V-Chip is enabled and the program exceeds the rating
limit set by you, the blocking message will appear and the
audio will be muted. Enter your four-digit secret code if you
wish to continue viewing the program. After entering your
code, all locks and rating blocks are disabled until the
Projection Television is turned off or until all settings are
reprogrammed.
Note: If you enter your four-digit secret code to override rating
blocks, you must reset all rating blocks by either
reprogramming or turning the Projection Television off.
SET UP
ˆ While the desired sub menu is highlighted, press VOL X to
select or activate feature.
ˆ IDIOMA/LANGUE - Select to change menu language
to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French).
ˆ ON MUTE - Activates the onscreen Closed
Caption feature when the MUTE button on the remote
control is pressed. To deactivate press MUTE button
again.
ˆ MODE - This television contains a built-in decoder
that displays (Closed Captioned) text across the
screen (white or colored letters on black background).
It allows the viewer to read the dialogue of a television
program or other information. The program viewed
must include Closed Captioning for the feature to work.
Activate the onscreen Closed Captioning feature by
selecting one of the following modes.
• OFF - When Closed Caption is not desired.
• C1 - For video related information to be displayed, up to
4 lines onscreen at a time. (It does not block relevant
parts of the picture). Text may be in any language.
• C2 to C4 - For other modes of video related information.
• T1 to T4 - For program guide and other information to be
displayed, when available. (Blocks a large portion of the
picture on the television screen).
Note: C1 mode is recommended for viewing Closed Captions.
ˆ ZOOM ADJ. -This feature lets you adjust the size of
the zoom picture and position it vertically.
Note: This feature is only selectable while in Zoom mode.
Press the ASPECT button on the remote control for
selecting Zoom mode.
ˆ RGB ADJ.
This feature is used to display RGB1 or RGB2 input signal
correctly on screen.
Note: This feature is only selectable while in RGB mode.
•
V-POSITION - To adjust the display vertical.
• H-POSITION - To adjust the display horizontally.
• CLOCK PHASE - To correct flickering or bleeding
of the contour appearing on the screen when
projecting a PC signal.
• DOT CLOCK - To make minor adjustments of the
dot clock frequency. When a RGB signal is
projected, the display area of the computer image
can be adjusted.
E Exempt - Exempt programming.
G
General - Programming intended for
audience of all ages. Contains no violence, or
the violence content is minimal or is depicted
appropriately.
8 ans +
8+ General - Not recommended for young
children. Programming intended for a broad
audience but contains light or occasional
violence. Adult supervision recommended.
13 ans +
Programming may not be suitable for
children under the age of 13 - Contains either
a few violent scenes or one or more
sufficiently violent scenes to affect them.
Adult supervision strongly suggested.
16 ans +
Programming may not be suitable for
children under the age of 16 - Contains
frequent scenes of violence or intense
violence.
18 ans +
Programming restricted to adults. Contains
constant violence or scenes of extreme
violence.
Main Picture Split Frame
Note: To unlock split frame, press button,
will be displayed in split frame, then enter four-digit
secret code.
SPLIT CTRL
PROGRAM
RATING
EXCEEDED
ACCESS - - - -
CODE
PROGRAM RATING EXCEEDED
ACCESS CODE - - - -
SET UP
IDIOMA/
LANGUE
ZOOM ADJ.
OFF
ON MUTE CC
MODE CC
PRESS MENU FOR MAIN MENU
ENGLISH
NO
RGB ADJ.
OTHER ADJ.
CC
SET UP
IDIOMA/
LANGUE
ZOOM ADJ.
OFF
ON MUTE CC
MODE CC
PRESS MENU FOR MAIN MENU
ENGLISH
NO
RGB ADJ.
OTHER ADJ.
CC
CC
SET UP
ZOOM ADJ.
PRESS MENU TO RETURN
SIZE 4
V-POSITION 0
NORMAL SET
SET UP
RGB ADJ.
PRESS MENU TO RETURN
V-POSITION
H-POSITION
CLOCK PHASE
DOT CLOCK
0
0
16
0