Patton electronic Patton SmartLink M-ATA - Manual (Page 63)

Localization 63
SmartLink M-ATA Getting Started Guide 6 • System
Ring Setting
Figure 38. Ring Setting section of Localization window
Ring Waveform
Specify the ring tone waveform.
Ring Frequency
Specify the ring tone frequency.
Ring Voltage
Specify the ring tone voltage.
FXS Port Polarity Configuration
Figure 39. FXS Port Polarity section of Localization window
Idle Polarity
Polarity before call connected.
Caller Conn Polarity
Polarity after outbound call connected.
Saving your work
When you are finished configuring settings, click the Save button (see figure 39 ) to save the changes.