Panasonic TH-37PH9UK - Manual (Page 47)

47
Specifi cations
TH-42PS9UK
Power Source 120 V AC, 50/60 Hz
Power Consumption
Power on 290W
Stand-by condition Save OFF 0.6 W, Save ON 0.4 W
Power off condition 0.1 W
Plasma Display panel Drive method : AC type 42-inch,
16:9 aspect ratio
Contrast Ratio Max 10000:1
Screen size 36.2” (920 mm) (W) × 20.4” (518 mm) (H)
× 42” (1,056 mm) (diagonal)
(No.of pixels) 408,960 (852 (W) × 480 (H))
[2,556 × 480 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 %
Applicable signals
Color System NTSC, PAL, PAL60, SECAM, Modifi ed NTSC
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p · 25p
· 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i
PC signals VGA
SVGA, XGA, SXGA, UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV VIDEO IN (BNC) 1.0 Vp-p (75 Ω or high impedance)
S VIDEO IN (MINI DIN 4PIN) Y: 1 Vp-p (75 Ω), C: 0.286 Vp-p (75 Ω)
AUDIO IN (RCA PIN JACK × 4) 0.5 Vrms (high impedance)
COMPONENT/RGB Y/G (BNC) 1.0 Vp-p/with/sync (75 Ω)
0.7 Vp-p/without/sync (75 Ω)
P B /B (BNC), P R /R (BNC) 0.7 Vp-p (75 Ω)
AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)
PC (HIGH-DENSITY Mini-D-SUB 15PIN) R,G,B/0.7 Vp-p (75 Ω)
HD, VD/1.0 - 5.0 Vp-p (high impedance)
Component
Y : 1.0 Vp-p (75 Ω : include sync)
P
B
/C
B
: 0.7 Vp-p (75 Ω)
P R /C R : 0.7 Vp-p (75 Ω)
AUDIO IN (M3 JACK) 0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter EUR7636070R
Batteries 2 × AA Size
Fixing bands (TMME203 or TMME187) × 2
Dimensions (W × H × D) 40.2” (1,020 mm) × 24” (610 mm) × 3.5” (89 mm)
Mass (weight)
main unit only approx. 57.3 lbs
with speakers approx. 66.1lbs
Note:
Design and specifi cations are subject to change without notice. Mass and dimensions shown are approximate.