Polaris RANGER XP 4X4 700 EFI - Manual (Page 70)

67
MAINTENANCE AND LUBRICATION
Gearcases
Middle Gearcase (RANGER 6X6)
Always check and change the middle gearcase oil at the intervals
outlined in the Periodic Maintenance Chart beginning on page 53.
Maintain the oil level even with the bottom thread of the fill plug hole.
Refer to the Gearcase Specifications Chart on page 63 for
recommended lubricants, capacities and torque specifications. See page
99 for the part numbers of Polaris products.
The middle gearcase fill plug (1) is located on the side of the gearcase.
Oil Check
1. Position the vehicle on a level
surface.
2. Remove the fill plug. Check
the oil level.
3. Add the recommended oil as
needed.
4. Reinstall the fill plug. Torque to
specification.
Oil Change
1. Remove the fill plug.
2. Remove the drain plug (2) from
the bottom of the gearcase. Drain the oil into a drain pan. Discard
used oil properly.
3. Clean and reinstall the drain plug. Torque to specification.
4. Add the recommended fluid.
5. Reinstall the fill plug. Torque to specification.
6. Check for leaks.
1
2