Palsonic 5159P - Manual (Page 16)

To connect AV input terminals
The following describes how to use and connect the TV with other AV equipment. Refer to
the owner’s manual of the equipment to be connected as well.
You can connect video equipments such as a VTR and video camera to this TV and enjoy the
high quality picture and sound.
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input
terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (photo
type)
To select the input, press the TV/AV button on the TV set or AV button on the remote controller
repeatedly until you see the corresponding input indication on the screen. To return to aerial input,
press the AV button until it displays program number, or press channel select button or the
CH button.
If the colour of video input is abnormal, the colour system setting may be incorrect. Press the SYS
button until the COLOUR AUTO is displayed on the screen. If the picture is still abnormal,
press the or button until normal colour appears.
NOTE on the S-VIDEO terminal
S-VIDEO input terminal and the VIDEO terminal can not be used at the same time. To use
equipment connected to the VIDEO terminal, disconnect plug from the S-VIDEO terminal.
14
CONNECTING OTHER EQUIPMENT
TV VIDEO 1 VIDEO 2
Aerial output
To audio
output To S-VIDEO
output terminals
VTR with S-VIDEO
terminal
VTR without
S-VIDEO terminal
Aerial output TO ANT IN TO ANT IN
To audio
output To video
output
yellow (video)
white (audio L/MOMO)
red (audio R)