Before using navigation 20 selecting navigation 20, Navigation, Before using navigation – Pioneer ANH-P9R-BK User Manual

Page 20: Selecting navigation

Advertising
background image

BACK

button quits the current menu and

displays the previous menu.
• The route is recalculated by the system if
deviation from the route is made.
• Press the

INFO

button to hear the current

navigation announcement.
• During the navigation announcement, adjust-
ment can be made to the volume using the
rotary volume (see page 13).
• By briefly pressing the

INFO

button, additional

information can be requested during route guid-
ance or the current position when route guid-
ance is not active See Information during route
guidance
on page 36.
• The current navigation announcement is
interrupted by pressing the

INFO

button.

• If the

INFO

button is pressed for longer than 2

seconds during a navigation announcement,
the navigation announcement switches off and
route guidance continues via display only.
By briefly pressing the

INFO

button, the naviga-

tion announcements are switched on again.
• The scroll marks

5 and ∞ indicate a selection

list which can be scrolled through using the
rotary stick.
Each entry in the list shown in capital letters
can be selected by pressing the

NAVI/OK

but-

ton.

Before using navigation

Before using the navigation, perform calibration
and language definition referring to the
Installation Manual.

Selecting navigation

These are the basic steps necessary to operate
the navigation. More advanced navigation oper-
ation is explained starting on next page.
Press the

NAVI/OK

button.

• The navigation CD must be loaded when start-
ing navigation operation for the first time.
If the navigation system has not yet been cali-
brated, a calibration journey is prompted (see
Installation manual).

The main navigation menu appears after this
display.

Notes

• Map data is on the navigation CD.
• A navigation CD with the data for the destina-

tion country is required for navigation opera-
tion.

• The navigation CD must be inserted to start

the route calculation. During the calculation,
the prompt

flashes on the display. Once

the calculation has been completed, the
prompt

extinguishes, the navigation CD

can be removed and an audio CD can be
inserted.

• When entering destinations, driving off

should be delayed until the prompt

disap-

pears.

Navigation

En

20

03

Section

Advertising