Pioneer Elite VSX-23TXH - Manual (Page 67)

Using other functions 08
67
En
SACD
GAIN f
Brings out detail in SACDs by
maximizing the dynamic range
(during digital processing). 0dB
+6 dB
HDMI
g
(HDMI
Audio)
Specifies the routing of the HDMI
audio signal out of this receiver
(amp) or through to a TV or flat
panel TV. When THROUGH is
selected, no sound is output from
this receiver. AMPLIFIER
THROUGH
A.DELAY
(Auto
delay) This feature automatically
corrects the audio-to-video delay
between components connected
with an HDMI cable. The audio
delay time is set depending on the
operational status of the display
connected with an HDMI cable.
The video delay time is
automatically adjusted according
to the audio delay time. h
OFF
ON
C.WIDTH i
(Center
Width)
(Applicable
only when
using a
center
speaker)
Provides a better blend of the
front speakers by spreading the
center channel between the front
right and left speakers, making it
sound wider (higher settings) or
narrower (lower settings). 0 to 7
Default: 3
DIMENSION
i Adjusts the depth of the surround
sound balance from front to back,
making the sound more distant
(minus settings), or more forward
(positive settings). –3 to +3
Default: 0
PANORAMA
i Extends the front stereo image to
include the surround speakers for
a ‘wraparound’ effect. OFF
ON
C.IMAGE j
(Center
Image)
(Applicable
only when
using a
center
speaker)
Adjusts the center image to
create a wider stereo effect with
vocals. Adjust the effect from 0
(all center channel sent to front
right and left speakers) to 10
(center channel sent to the center
speaker only). 0 to 10
Defaults:
Neo:6 MUSIC:
3
Neo:6
CINEMA: 10
EFFECT Sets the effect level for the
currently selected Advanced
Surround or ALC mode (each
mode can be set separately). 10 to 90
Defaults: 50
(90 for
EXT.STEREO
only)
a.When EQ OFF is selected, the MCACC indicator does not light.
b.• This setting is only displayed when the listening mode is Stereo,
Auto surround (STEREO) or ALC (STEREO).
• This setting is disabled in THX listening modes.
c.The adjustment can be made only when TONE is set to ON.
d.With the iPod/USB input function, by default S.RTRV is set to ON.
e.The initially set AUTO is only available for Dolby TrueHD signals.
Select MAX or MID for signals other than Dolby TrueHD.
f. You shouldn’t have any problems using this with most SACD
discs, but if the sound distorts, it is best to switch the gain setting
back to 0 dB.
Setting What it does Option(s)
g.• HDMI Audio setting cannot be switched while performing
synchronized amp mode operations.
• The synchronized amp mode must be turned on in order to play
the receiver’s HDMI audio and video input signals from the TV with
the receiver’s power in the standby mode. See Synchronized amp
mode on page 65.
h.This feature is only available when the connected display supports
the automatic audio/video synchronizing capability (‘lipsync’) for
HDMI. If you find the automatically set delay time unsuitable, set
A.DELAY to OFF and adjust the delay time manually. For more
details about the lipsync feature of your display, contact the
manufacturer directly.
i. Only when listening to 2-channel sources in Dolby Pro Logic IIx
Music/Dolby Pro Logic II Music mode.
j. Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA
mode.
VSX-23TXH_CUXJ.book 67 ページ ２００９年５月８日 金曜日 午前１０時４５分