PYLE Audio PDWM9000 - Manual (Page 6)

5
6. Specifications
System Specifications
Carrier Frequency: UHF 790-806MHz
Frequency Stabilization < 30ppm
Dynamic Range: More Than 90dB
Total Harmonic Distortion: Less Than 0.5%
Frequency Response: 40HZ-15KHZ 3dB
Audio Output Level: Unbalanced Out: 0 400mV
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
±
–
–
±
±
Balanced Out: 0 ±200mV
1. Unit does not turn on.
• Make sure the power cable is connected properly.
2. AF display moves, but there is no sound output.
3. The effective receiving distance decreases.
• Check the fuse.
• Check the voltage selector
• Check volume level.
• Check audio cable.
• Check the settings on your amplifier
• Change batteries.
• Check for any devices that may be causing interference.
4. Sound Quality Deteriorates
• Change Batteries.
• Check for any devices that may be causing interference.
• Do not use two machines with the same frequency at the
same time.
Receiver Specifications
Power Supply: AC 11 220V 50 DC12V
Power Consumption: 5 Watts
S/N Ratio: 90 B
Image & Spurious Rejection: 80d
Border Upon Channel Rejection: 80d
Receiving Sensitivty: 10dBuV(SINAD=30dB)
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . .
. . . . . . . . . . . . . . . . . . . .
0 60HZ/ HZ or
> d
> B
> B
<
5. Troubleshooting
Caution:
Do not open the unit. There are no user serviceable parts
inside. Refer service to a qualified technician.