Panasonic WV-NM100 - Manual (Page 46)

46
DETECTING MOTION IN THE MONITORED AREA
Setting of the Motion Detection Area
Set the area where motion has to be detected. You can set up to four areas. The setting can be made on the "VMD
area" page of "Alarm&Transmission".
Begin the operation from the "Basic setup" page.
Refer to page 24 and 25 to display the "Basic setup" page.
The "Operation mode" page of "Advanced setup" appears.
Screenshot 2
Screenshot 1
Click the [Advanced setup] button.
STEP1
Click the [Alarm&Transmission] button.
STEP2