Panasonic AG-VP300P - Manual (Page 19)

19
VC
R
VCR Playback (continued)
To Playback in the Desired Picture
Quality
(Picture Mode)
This function reproduces optimum playback picture from various
kind of recorded tapes and contents.
Press [PICTURE] and select the corresponding Picture Mode as
follows.
≥Pressing [PICTURE] once makes
the On Screen Display appear; after
that, pressing it repeatedly changes
the indication in the following order:
STANDARD (Initial Setting) >DYNAMIC>
SOFT >STANDARD (Initial Setting)
Tracking Adjustment and
Vertical Locking Adjustment
Preparations
≥Switch [VCR/TV/DVD] to “VCR”.
ª For manual tracking adjustment
The unit usually makes tracking adjustments for you, but you may
need to do it manually, if noise appears on a tape recorded on
other equipment.
During play
Press [TRACKING/V-LOCK] I or J .
Repeat until the noise disappears.
To return tracking control to the unit
Press both [TRACKING/V-LOCK]
I and J at the same time.
To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note:
≥This may not be effective on some tapes.
≥You can also adjust the tracking with [CH]
IJ on the unit.
ª For vertical locking adjustment
Adjust the vertical to stop the picture jiggling while paused.
While paused
Press [TRACKING/V-LOCK]
I or J .
Repeat until the jiggling stops.
To return to the previous condition
Press both [TRACKING/V-LOCK]
I and J at the same time.
Note:
≥This may not work with some televisions. Try adjusting the
vertical on the television itself.
≥You can also adjust the vertical with [CH] IJ on the unit.
Mode Characteristic
Example for
Purpose
STANDARD Normal
Recorded
TV programs
DYNAMIC Clear & Vivid Scenery, Sports
SOFT Mild Rental soft tapes
CH 1
STEREO
L R
STANDARD