Panasonic NV-HV60 EN - Manual (Page 9)

9
Setting the Clock of Your VCR
In the event of a power failure, the clock will operate on its
back up system for a minimum of 3 years. After 3 years, clock
back up in the event of a power failure can only be
guaranteed for maximum of 1 hour.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
• Example:
Date;
16 October, 2005
Time; 20:15
Operations
1 Press [MENU]
(7) to display the
Main menu on the TV screen.
2 Press [Cursor] (37) ( 34) to
select [CLOCK SET] then press
[OK]
(23).
3 Set each item by pressing
[Cursor] (37) ( 341). Press
[Cursor] (37) ( 2) to return to the
previous item.
At the set time (H:M) point:
• When it is kept pressed, the
indication changes in 30 minute
steps.
• There is no need to press
[Cursor] (37) ( 1).
4 Press [MENU] (7).
• The clock starts.
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily
be reset to the proper time.
Example:
Resetting the clock to 12:00.00
1 Press [MENU] (7) to display the Main menu on the TV
screen.
2 Press [Cursor] (37) ( 34) to select [CLOCK SET] then
press [OK] (23).
3 When the current clock displays on the VCR is
between 11:58.00 and 12:01.59, press [MENU] (7) as
soon as you hear the 12:00.00 signal. This resets the
time to 12:00.00.
M
1
Y
2005
D
1 H:M
0:00
CLOCK SET
START:MENU
SELECT:
MENU
SELECT
END : , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
MENU
SELECT
END : , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
NV-HV60GL_GN.book 9 ページ ２００３年２月３日 月曜日 午後３時３２分