Panasonic SC-EN6 - Manual (Page 4)

4
Radio stations can be turned manually by selecting the station’s frequency or they can be preset into channels to make it easy to tune.
You can preset up to 20 FM channels and up to 12 AM channels.
If noise is excessive in FM
You can improve FM reception by switching reception to monaural.
Radio operations
CLOCK/
TIMER ADJ
SLEEP
PGM/CLEAR
PLAY MODE
u i
3 4
TIMER
SET/CHECK DISPLAY
1 2 3
4 5 6
7 8
0
9
> = 10
AUX
TUNER/
BAND g
CD
q/h
EXTRA
D.BASS
SOUND
EQ
LIVE
VIRTUALIZER
u ALBUM i
4 VOL VOL 3
SC-EN6 SC-EN7
PRESET TUNE u ALBUM i
Input using the numbered
buttons
To select a 2-digit number
e.g. 11: [ 10] → [1] → [1]
>
=
To adjust the volume
-BAND -AUTO PRESET
u / – + /i TUNING MODE
To adjust the volume
VOL 22
0
(Minimum)
50
(Maximum)
Function indicator
The color changes when using
the radio.
– VOLUME +
To improve reception
Manual
tuning
Select
“FM” or “AM”
Select the
frequency Select
“MANUAL”
TUNER/
BAND u i
3 4
Select
“FM” or “AM”
Select the
frequency
Auto tuning
• Auto tuning stops when it finds a station.
• To cancel auto tuning press the same button again.
Press and hold until the frequency
starts changing rapidly
Main unit Remote control
u i
3 4 u / – + /i
Note
• Auto tuning may not function when there is
excessive interference.
Remote control
Main unit
-BAND -AUTO PRESET
u/ – + /i TUNING MODE
FM AM
Extend the whip antenna and
adjust its direction. Change the direction and location
of the AM loop antenna.
PLAY MODE
Press to turn the MONO
mode ON/OFF
MONO
Automatic
presetting
The tuner
presets all the
stations it can
receive into
channels in
ascending order.
Select
“FM” or “AM”
Press and hold
until “AUTO”
appears
Note
During automatic presetting, the memory indicator
(
) flashes and the frequency scrolls. The
memory indicator and channel numbers are
displayed for a second when a station is preset.
The first station to be preset is displayed when
presetting finishes.
PGM
Manual
presetting
Preset the
stations one at a
time.
PGM/CLEAR
1 2 3
4 5 6
7 8
0
9
> = 10
Select a channel
Tune to
the signal
you want
to set as
the preset.
Note
The station occupying a channel is erased if another
station is preset over that channel.
Selecting
channels
Within 10 seconds
Main unit
Select a channel
Remote control
Enter preset mode
PGM
-BAND -AUTO PRESET -BAND -AUTO PRESET
Select
“FM” or “AM”
Select
“PRESET”
Select a
channel
SC-EN6
u ALBUM i
SC-EN7
PRESET TUNE
TUNER/
BAND
Select a channel
1 2 3
4 5 6
7 8
0
9
> = 10
TUNER/
BAND
Select
“FM” or “AM”
Perform both FM and AM station presetting once.
Select
“FM” or “AM”
-BAND -AUTO PRESET
u/
– + /i TUNING MODE
SC-EN7-6(RQT7316-P).fm 4 ページ ２００３年１１月２８日 金曜日 午後８時１０分