PYLE Audio PLDVD65IN - Manual (Page 8)

8
INSTALLATION
DIN FRONT-MOUNT (Method B)
1. Factory radio mounting bracket
2. Car radio mounting bracket
3. Screw
4. After aligning the car radio mounting
bracket with the factory radio mounting
bracket, tighten the screws (5x5mm)
at 2 places on each side.
5. When fix factory radio mounting bracket
with the screws, use a standard-tipped
screwdriver to bend open the tabs of the
car radio mounting bracket to make them
fit into the holes in the factory radio
mounting bracket.
3
4
1
5
2