Paxar J641 - Manual (Page 2)

Cleaning
CAUTION
DO NOT touch the printhead with your hands. This may damage the
printhead.
1. Turn the power off and open the printer.
2. Remove the label roll and ribbon cassette.
3. Moisten a cotton swab with alcohol or use a cleaning pen. Rub it
back and forth across the printhead, platen roller, peel bar, pinch
rollers, peel blade, and tear bar to remove build-up.
4. Let the printer dry and reload the supplies.
LED Indicator
Use the color of the LED and whether it is solid, blinking slowly, or
blinking rapidly to determine the meaning of the LED indicator.
LED States Solid Fast Blink
(
1 ⁄
4 second)
Slow Blink
(2 seconds)
GREEN Ready...
On-Demand Label Ready N/A
AMBER Ready...
Continuous Error Printhead Hot...Wait
AMBER/
GREEN N/A Hardware
Error Firmware
Error
Platen
Roller
Peel Blade
Printhead
Tear Bar
Pinch
Roller