Other connections 08, Bi-wiring your speakers, Connecting additional amplifiers – Pioneer VSX-1016TXV-K User Manual
Page 44: Using this receiver with a pioneer plasma display, Normal (sb), 2nd zone, Surround back speaker setting, On page 33, Caution, L (single)
Other connections
08
44
En
Bi-wiring your speakers
The reasons for bi-wiring are basically the same as bi-
amping, but additionally, interference effects within the
wire could be reduced, producing better sound. Again, to
do this your speakers must be bi-wireable (that is they
must have separate terminals for the high and low
frequencies). When bi-wiring, make sure you’ve selected
Normal (SB)
or
2nd Zone
in
Surround back speaker
setting
on page 33.
•
To bi-wire a speaker, connect two speaker cords to
the speaker terminal on the receiver.
Using a banana plug for the second connection is
recommended.
Caution
• Make sure you use a parallel (not series, which are fairly
uncommon) connection when bi-wiring your speakers.
• Don't connect different speakers from the same
terminal in this way.
Connecting additional amplifiers
This receiver has more than enough power for any home use,
but it’s possible to add additional amplifiers to every channel
of your system using the pre-outs. Make the connections
shown below to add amplifiers to power your speakers.
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
AC outlet.
• You can use the additional amplifier on the surround
back channel pre-outs for a single speaker as well. In
this case plug the amplifier into the left (
L (Single)
)
terminal only.
• The sound from the surround back terminals will
depend on how you have configured the
Surround
back speaker setting
on page 33.
• To hear sound only from the pre-outs, switch the
speaker system to
OFF
, or simply disconnect any
speakers that are connected directly to the receiver.
• If you’re not using a subwoofer, change the front
speaker setting (see
Speaker Setting
on page 37) to
LARGE
.
Using this receiver with a Pioneer
plasma display
If you have a Pioneer plasma display, you can use an
SR+ cable
1
to connect it to this unit and take advantage
of various convenient features, such as automatic video
input switching of the plasma display when the input is
changed.
2
VSX-1016TXV
(Single)
IN
OUT
IN
MONITOR
OUT
OUT
DVR/VCR2
AM LOOP
PRE OUT
OUT
IN
3
R
R
R
R
R
R
L
L
L
L
L
L
CENTER
CENTER
MULTI CH IN
FRONT
FRONT
SUR-
ROUND
SUR-
ROUND
SURROUND
BACK
SURROUND
BACK
SUB
WOOFER
SUB
WOOFER
INPUT
L
R
ANALOG
Front channel
amplifier
INPUT
L
R
ANALOG
Surround channel
amplifier
INPUT
L
R
ANALOG
Surround back
channel amplifier
INPUT
ANALOG
Powered
subwoofer
INPUT
ANALOG
Center channel
amplifier (mono)
Note
1 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).
2 This receiver is compatible with all SR+ equipped Pioneer plasma displays from 2003 onward.
CD
IN
IN
IN
IN
IN
IN
OUT
OUT
OUT
IN
IN
IN
IN
OUT
OUT
CD-R/TAPE/MD
DVD/LD
DVR/VCR1
DVR/VCR2
TV/SAT
CONTROL
AUDIO
ANTENNA
AM LOOP
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
DIGITAL
ASSIGNABLE
OPTICAL
COAXIAL
VIDEO
S-VIDEO
COMPONENT VIDEO
OUT
HDMI
XM
ASSIG-
NABLE
OUT
(TV/SAT)
(CD)
(DVR/
VCR1)
IN
IN 1
IN 2
OUT
IN
1
IN
1
IN
2
IN
3
(DVD/LD)
IN 1
(DVR/VCR2)
IN 2
IN 2
IN 3
3
1
R
L
R
L
OUT
IN
2
1
ASSIGNABLE
3
1
FRONT
OUT
CONTROL
Pioneer plasma
display
VSX-1016TXV
VSX-1016TXV_KU.book.fm 44 ページ ２００６年３月２４日 金曜日 午後９時１９分