Precor EFX 883 User Manual
Page 26
24
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833
4.
Apply pressure to the handlebar and rotate it back and
forth to ease it into the handlebar clamp.
5.
Slide the inner handlebar cap onto the lower handlebar.
6.
Thread one hex head screw through the handlebar and
handlebar mount. Partially tighten the screw.
Figure 16: Handrail attachment detail
7.
Repeat steps 1 through 7 to attach the opposite
handlebar.
To tighten the handlebars completely:
1.
Use the wrench included with the unit, or a 1³₈-inch
socket, box, or open-end wrench, to tighten the handlebar
screws fully.
2.
Use a ³₁₆-inch hex wrench to tighten the two handlebar
clamp fasteners fully.
3.
Insert the center crossbar cap for each handlebar and
press firmly into place.
Figure 17: Center crossbar cap attachment
Note: When secure, the center crossbar caps hold the lift
cover in place.