Installation requirements, Hardware kit (not to scale) – Precor EFX 883 User Manual

Page 16

Advertising
background image

14

Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833

Begin installation of all fasteners by hand, then partially

tighten them. Do not fully tighten fasteners until

instructed to do so.
Important: When wrench-tightening the screws, make sure

the head of the fastener is parallel to the product surface. If it

is not, stop tightening to avoid cross-threading. To avoid

further damage, stop assembly work and contact Customer

Support.

Installation Requirements

Prior to assembly, make sure you have the required tools and

hardware.

Hardware Kit (not to scale)

The hardware kit shipped with this equipment contains the

fasteners and other hardware components shown in the

following table. Before you begin assembly, make sure that

your hardware kit is complete. If not, please contact Precor

Customer Support.

Fasteners

Quantity

Flat washers (⁵₁₆-inch)

14

Split washers (⁵₁₆-inch)

14

Flat head hex drive screws
(¹₄-inch x ³₄-inch)

4

Phillips-head machine screws
(#8 x ³₄-inch)

3

Buttonhead screws (⁵₁₆–inch x �
1

–inch)

14

Advertising
This manual is related to the following products: