Panasonic KX-FL521 - Manual (Page 65)

Features Summary
65
Code Display & Feature Settings How the unit operates
ON
OFF
#44 To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE ALERT
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
#46 To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
FRIENDLY RCV ON
OFF
“ON”: You do not have to press
for fax reception. FAX START
#41
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 46).
FAX ACTIVATION
ON /
CODE=
9
OFF
1. Follow steps 1–3 on page 64.
2. Rotate
to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
● Do not enter “0000”.
MENU
SET
SET
JOG DIAL
If you hear slow beeps, press
and listen to
recorded messages (p. 53). The
beeps will stop.
PLAY MESSAGES
#42
To alert you with beeps when a
new voice message is recorded
MESSAGE ALERT ON
OFF
If you hear slow beeps, erase the
recorded messages (p. 53). The
beeps will stop.
#43 To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
REC. TIME ALERT
ON
OFF
Voice guidance example:
“
Start transmission.”
“ Please hang up the handset for
transmission.”
“ Transmission is complete.”
“ Transmission has failed.”
“ Transmission has been interrupted.”
“ Start reception.”
“ Please hang up the handset for
reception.”
“ Reception is complete.”
“ Reception has failed.”
“ Reception has been interrupted.”
If you wish to hear the voice
guidance (see right) at each fax
transmission/reception, set this
feature to “ON”.
● To hear the voice guidance only
when fax transmission/reception
fails, select “ERROR”.
FAX GUIDANCE
#47
ON
OFF
ERROR
(The default setting is in bold type.)